Publicidad
Replacing the Adhesive Glue Board
It's recommended to replace the glue board every 1-2 months.
To replace the glue board:
1. Unplug the power cable and wait for 5 minutes for the bulb to cool
down.
2. Lift the front cover and remove the old sticky glue board.
3. Install a new sticky glue board with the sticky side facing the bulb.
4. Close the front shell.
5. Re-connect the power cable by plugging it back into the mains
socket and switching on.
Replacing the UV Bulb
It is recommended to replace the UV bulb after around 5000 hours of normal
operation.
To replace the bulb:
1. Unplug the power cord and wait for 5 minutes for the bulb to cool
down.
2. Lift the front cover and remove the old UV bulb by rotating it.
3. Insert the new UV bulb in reversed rotation.
4. Close the front cover.
5. Re-connect the power cable by plugging it back into the mains
socket.
IMPORTANT: Ensure that disposal of the old UV bulb is done
responsibly and in line with the local council's waste and recycling
regulations.
Maintenance
19
Publicidad
