Publicidad
Idiomas disponibles
Idiomas disponibles
3.2.
Preparation for operation
POSITIONING OF THE UNIT
The ambient temperature must not exceed 40°C and ambient humidity should not
exceed 85%. Place the unit in a way that ensures good air circulation. Maintain a
minimum clearance of 10 cm from any wall of the unit. Keep the unit away from any
hot surfaces. Always operate the unit on a level, stable, clean, fireproof, and dry
surface and out of the reach of children and persons with impaired mental, sensory,
and intellectual functions. Place the unit in such a way that the main plug can be
reached at any time. Ensure that the power supply to the unit corresponds to that
specified on the identification plate!
Before using it for the first time, disassemble all parts in direct contact and wash
them, as well as wipe the device itself with a damp cloth.
ASSEMBLY OF THE DEVICE
The device is generally delivered assembled. Additional assembly is required for the
tank, the filling tip, the foot pedal for operation (optional), and the connection of
the power cable. The reservoir and filling tip are attached with the included round
metal clamping clamps, with the reservoir also having a round rubber gasket. This
seal is installed in the connection between the end of the tank and the entrance to
the filling mechanism of the device. The gasket has a special groove to facilitate its
correct positioning - see the pictures below:
Publicidad
