Descargar Imprimir esta página

Royal RC-FMP-01 Manual De Instrucciones página 23

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 73
Knob - adjusts the speed of the filling application; the higher the number, the
higher the speed of the mechanism, and thus the filling application. In normal
conditions adjust the working only with this knob.
STOP - a button for temporarily suspending the operation of the device.
FWD - device continuation button (after stopping).
Other buttons - not supported in this model
3.3.2 Timer control panel
In a given setting, the most important are the " 4, 3, 2, 1 " buttons, which allow you
to set the exact time of one filling cycle from the range of 00.00-99.99 seconds -
each button is subordinated to a given digit, and each time it is pressed, its value
changes in the range of 0-9. After each cycle, the device stops automatically and
enters the standby mode.
Other buttons unsupported.
NOTE: if the timer is set to 00.00 seconds, the device will not work.
3.3.3 To start working with the device:
a) Make sure that the device is connected to the power source

Publicidad

loading