AquaMaster Tools E60 Pro Manual Del Usuario página 6

Replacing the electrode
Watch the How-to videos at Aqua Master Tools' website.
1. Properly unscrew the sealing ring in the lower part of the meter.
2. Remove the defected/old electrode by gently pulling it.
3. Carefully place the new electrode with the recess in the correct
position so that the connectors properly connect and do not
damage the meter or electrode.
4. Check that the rubber seal is properly placed.
5. Tightly tighten the sealing ring.
6. Calibrate the meter as described in this manual.
7. The meter is now ready for use.
Specifications
Range
Resolution
Accuracy
Calibration
Features
Power supply
Auto. power-off
Calibration indicator With correct calibration
Waterproof
Dimensions
Weight
EN
EC: 0 ~19.9 mS/cm (0 ~ 19999 μS/cm)
TDS: 0 ~ 19.99 PPT / PPM: 0 ~ 1999 PPM
Temperature: 0°C ~50°C (32°F ~ 122°F)
EC: 0.1mS/cm, 1 μS/cm (<1999 μS/cm),
10 μS/cm (>1999 μS/cm)
TDS: 0.01 PPT / PPM: 1 PPM
Temperature: 0.1°C
TDS: 0.01 PPT / PPM: 1 PPM
Temperature: 0.1°C
EC: ± 2% F.S.
TDS: ± 2% F.S. /PPM ± 2% F.S.
Temp: ±0 .5°C
Temp. compensation: 0°C - 50°C (32°F - 122°F)
EC: 1 point auto mS/cm 1.4 EC (μS/cm 1413 EC)
Battery indicator & automatic temp. compensation
3 × 1.5 Volt AG-13 button cell battery (included)
After 8 minutes
IP67
220 x 40 x 40 mm
102 grams
6