Descargar Imprimir esta página

Avintage AVI63CSZF Manual De Utilización página 53

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

11. TROUBLE SHOOTING
You can solve many common wine cooler problems easily, saving you the cost of a possible service call.
Try the suggestions below to see if you can solve the problem before calling the servicer.
PROBLEM
Wine cooler does not operate
Wine cooler is not cold enough
Turns on and off frequently
The light does not work
Vibrations
The wine cooler seems to make too much noise
The door will not close properly
Failure LED display
Fans do not work anymore
« E1 » or « E2 » error code
POSSIBLE CAUSE
Not plugged in
The appliance is turned off
The circuit breaker tripped or a blown fuse
Check the temperature control setting
External environment may require a higher
setting
The door is opened too often
The door is not closed completely
The door gasket does not seal properly
The room temperature is hotter than normal
A large amount of contents has been added to
the wine cooler
The door is open too often
The door is not closed completely
The temperature control is not set correctly
The door gasket does not seal properly
Not plugged in
The circuit breaker tripped or a blown fuse
The bulb has burned out, contact your after-
sales service
The light switch is "OFF"
Check to assure that the wine cooler is level
The rattling noise may come from the flow of the
refrigerant, which is normal
As each cycle ends, you may hear gurgling
sounds caused by the flow of refrigerant in your
wine cooler
Contraction and expansion of the inside walls
may cause popping and crackling noises
The wine cooler is not level
The wine cooler is not level
The door was reversed and not properly installed
The gasket is dirty
The shelves are out of position
Poor display quality
Temperature value does not appear
Contact your after-sales service
Contact your after-sales service
Temperature probe is failing
Contact your after-sales service
52

Publicidad

loading