Hardware; Installation - Extel eWatch 900 Instrucciones De Uso E Instalación

4. HARDWARE

LED showing the number of connected
cameras
USB port

5. INSTALLATION

3G 4G
WI
*: Not included
Before installing the NVR, the eWatch range camera(s) connected to it must be configured. Please refer to the
relevant eWatch camera instructions for guidance on installing them.
Once the cameras have been configured, connect the NVR to the internet access point using an RJ45 network
cable, then plug the NVR into the mains.
To get the most out of your NVR, we recommend connecting it to a screen via the HDMI port and connecting
the mouse provided to one of the NVR's USB ports.
Warning: The NVR and cameras must be connected to the same network.
Internet
Box internet
CFI EXTEL EWATCH 900 07/2017
Ethernet port
HDMI port
USB port
power jack
reset
WI
GB4