Next Level Racing GO KART PLUS Manual De Instrucciones página 10

support@nextlevelracing.com
A)
07
A) Align the nut inserts on the Centre Pole with the holes on the Centre Pole Base.
B) Bolt through and secure with 4 x M8 Bolts and Washers.
A)
08
A) Align the mounting holes on the Wheel Plate with the nut inserts on the Centre Pole.
B) Bolt through and secure with 4 x M8 Bolts and Washers.
M8 Ø30mm Washers
A)
M8 Ø35mm Washers
M8 Ø35mm Washers
A) Align the mounting holes on the Left and Right Seat Frames with the nut inserts on the Go Kart Seat. Align 2 x Ø30mm and 2 x Ø35mm washers
09
in between Seat Frames and Seat. B) Bolt through and secure with 4 x M8 Bolts and Ø20mm Washers. (2 x 30mm Bolts for the upper mounts and 2
x 12mm Bolts for the lower mounts).
B)
B)
B)
M8 Ø30mm Washers
10
PARTS:
• • 1 x Centre Pole
• • 4 x M8 16mm Bolts
• • 4 x M8 Ø20mm Washers
• • Tip: If using high force feedback
wheelbase it is recommended to
use additional spare M8 16mm bolts
on Centre Pole (2x extra on each
side).
PARTS:
• • 1 x Wheel Plate
• • 4 x M8 16mm Bolts
• • 4 x M8 Ø20mm Washers
PARTS:
• • 1 x Go - Kart Seat
• • 1 x Left Seat Frame
• • 1 x Right Seat Frame
• • 2 x M8 30mm Bolts
• • 2 x M8 12mm Bolts
• • 4 x M8 Ø20mm Washers
• • 2 x M8 Ø30mm Washers
• • 2 x M8 Ø35mm Washers