Next Level Racing GO KART PLUS Manual De Instrucciones página 15

SEAT COVER INSTALLATION
22
Install the Go Kart Seat Cover starting from the bottom first. Wrap the outer lip around the seat. Pinch
drawstring release on the back and pull the drawstring to tighten.
PEDAL PLATE LATERAL ADJUSTMENT
23
Loosen the NLR Knobs securing the Pedal Plate to the Pedal Frame. Adjust to the desired position and
tighten to lock in place.
PEDAL PLATE ANGLE ADJUSTMENT
24 Remove the front NLR Knobs and loosen the rear NLR Knobs securing the Pedal Plate to the Pedal
Frame. Adjust to the desired angle, reinstall the front NLR Knobs and tighten to lock in place.
Video Instruction: bit.ly/nlrbuild
15
PARTS:
• • 1 x Go Kart Seat Cover
• • Tip: Hand wash Seat Cover
separately in cold water only
PARTS:
• • NIL
PARTS:
• • NIL