Next Level Racing GO KART PLUS Manual De Instrucciones página 13

A)
16
A) Align the Front Bumper Mount with the nut inserts on the front of the Pedal Frame.
B) Bolt through and secure with 3 x M8 Bolts and Washers.
A)
17
A) Align the Front Bumper with mounting holes on Front Bumper Mount.
B) Bolt through and secure with 4 x M8 Bolts and Flange Nuts.
18
Align the Rear Bumper Mount with the nut inserts on the Rear Frame.
Video Instruction: bit.ly/nlrbuild
B)
B)
NOTE: If using Buttkicker refer to STEP 29.
13
PARTS:
• • 1 x Front Bumper Mount
• • 3 x M8 16mm Bolts
• • 3 x M8 Ø20mm Washers
PARTS:
• • 1 x Front Bumper
• • 4 x M8 20mm Socket Head Bolts
• • 4 x M8 Flange Nut
PARTS:
• • 1 x Rear Bumper Mount