Next Level Racing GO KART PLUS Manual De Instrucciones página 9

NOTE: If using Load Cell Pedals, replace M8 Knobs with
M8 20mm Bolts and Washers supplied.
04
A) Align the nut inserts on the Pedal Plate with the slots on the Right and Left Pedal Frames.
B) Bolt through and secure with 4 x NLR Knobs.
NOTE: Flip the assembly upside down for easy installation.
If using Castor Wheels, leave middle rear mount empty.
A)
05
Flip the assembly upside down. A) Align 5 x Foot Spacers and 2 x Frame Braces with the footing mounts on the
bottom of the cockpit. B) Install 9 x Flat Feet or 8 x Castor Wheels into the mounting points.
NOTE: Flip the assembly back
upright.
A)
06
A) Align the mounting holes on the Centre Pole Base with the nut inserts on the Centre Frame.
B) Bolt through and secure with 4 x M8 Bolts and Washers.
Video Instruction: bit.ly/nlrbuild
on Other
B)
B)
9
PARTS:
• • 1 x Pedal Plate
• • 4 x M8 Knobs
Repeat
Side
PARTS:
• • 9 x Flat Feet or 8 x Castor Wheels
• • 2 x Frame Braces
• • 5 x Foot Spacers
PARTS:
• • 1 x Centre Pole Base
• • 4 x M8 16mm Bolts
• • 4 x M8 Ø20mm vWashers
or