Indel Webasto Marine ISOTHERM Digital Display Manual De Instrucciones página 37

ISOTHERM Digital Display
sprays of water.
WARNING! Install the refrigerator away from gas or LPG cylinders.
WARNING! The product must be installed in an area accessible for any
maintenance. The housing space of live parts and of the condensing unit/compressor
must only be opened voluntarily and not directly accessible.
WARNING! If there is a battery charger, it must be connected to the battery
and never directly to the refrigerator.
WARNING! In case of power connection from AC mains, to avoid the risk
of serious personal injury, ensure that it is equipped with cut-off devices (switches)
which permit total disconnection of the unit current and protective devices which
automatically intervene in the event of malfunction.
WARNING! Never touch any damaged or non-insulated electrical cables
while the electrical power supply is enabled. This observation is particularly true
when the unit is connected to 115Volt or 230Volt mains voltage.
Installation
o Check that the Secop compressor control unit is type 101N0212
(BD35F and BD50F) or 101N0510 (BD35F and BD50F).
o The unit is equipped with all the components necessary for its
assembly, which is easy. Flush mounting installation requires the
use of a Ø 51mm [2.00in] hole cutter that is suitable for drilling the
material into which the digital display will be installed.
o IWM is not responsible for incorrect installation or improper use.
o We recommend installing the device in a location that is not accessible
by untrained personnel.
37