Indel Webasto Marine ISOTHERM Digital Display Manual De Instrucciones página 39

ISOTHERM Digital Display
o Flush mounted display.
•
•
•
•
•
o Inserting the frame and the display on the frame.
•
•
used for the passage of cables and to house the rubber gland
positioned on the box.
If you wish to build in the display, you must choose the box with
an edge, see Fig. 07.
To install the flush mounted box, you will need a cutter to create
holes with diam. starting from 51mm [2.00 in], similar to the one
illustrated in Fig. 08.
The end of the manual contains a page with a template with the
shape of the recessed part to be made with actual dimensions,
see Fig. 10. There are 4 points present inside the drawing. These
are used to precisely determine where the drill guide hole shall be
made.
Position this sheet on the panel where you will be installing the
flush mounted display and make the 4 guide holes using the 4
points drawn on the template, see Fig. 10,11,12.
Make use of a file to eliminate excess material between one
milling and another so that the top and bottom surfaces are linear,
Fig. 13. We recommend filing from the outside toward the inside
to avoid damaging the outer finish of the panel, which could
chip. Take care not to file off too much material, or the hole could
become visible and unattractive. Therefore, we suggest trying
several times to see if the box fits into the hole without excessive
force and filing only what is necessary for it to fit properly into the
recessed housing Fig. 14. To fasten the box, simply apply marine
silicone on the internal back corner edge, or else use a light metal
bracket (not supplied) fixed through two holes on the bottom of
the box itself.
Find the display support frame and fasten it on the box using two
M2.5 screws. Tighten them completely until there is increased
resistance to rotation. Make sure that the head of the screw is
flush with the support plane Fig. 16.
Find the connection cable between the display and the control
unit, see Fig. 17, insert the cable through the wall. For safety
39