English
Owner´s manual
•
12. Always wait at least 10 seconds after the compressor shuts off before restarting it.
13. All compressors are equipped with a pressure regulator. By operating the knob with the faucet open,
turn the regulator clockwise to increase the pressure and counterclockwise to decrease it (Fig. 7), the air
pressure can be regulated to optimize the use of pneumatic tools. After setting the required value, the nut
below must be tightened to hold the knob (Fig. 8)
14. The set value can be checked on the meter.
15. Check that the air consumption and maximum working pressure of the pneumatic tool to be used are
compatible with the pressure set on the pressure regulator and with the amount of air supplied by the
compressor.
16. Always pull out the plug and drain the reservoir after you have completed your work (Fig. 9)
Fig. 1
Fig. 3
Fig. 5
19
Fig. 2
Fig. 4.1
Fig. 6
Fig. 4.2
19