Publicidad
Idiomas disponibles
Idiomas disponibles
Before removing the battery from the bike, you need to unlock as following steps:
* make sure the switch is off (Fig4.5).
* Press the key and turn it anticlockwise from 6 o'clock to 12 o'clock position. (ref. Fig 4.2)
* Remember to take off and care about the key after you withdraw the battery from the carrier!!!
(Fig. 4.3)
(Fig. 4.4)
(Fig. 4.5)
5.
LED and Function
5.0 On / Off: Press the
button to turn the LED display on and off.
5.1 6KM/H
Long press the
button to use the "assisted start" function to
facilitate the start of the race. After the motor starts working and the bike
running, you could easily pedal and release the button.
(Fig. 5)
5.2 Power display on handlebar panel:
Under normal state, turn on the power supply, the four LED lights will be displayed from low to high power
levels. When all LED lights are bright, this condition indicates that the electricity is full. If the last light has
been flashing, this is a warning, should be charged immediately before riding the battery.
4 LED light on: power is 100%
3 LED light on: power is 70%
2 LED light on: power is 50%
1 LED light on: power is 25%
1 LED light is on and flashing: power will be empty, the battery need to be charged immediately.
39/77
Publicidad
