Publicidad
Idiomas disponibles
Idiomas disponibles
&
1.
2.
3.
4.
5.
6.
WARNING:
TO AVOID SERIOUS
iNJURY, BEFORE PERFORMING
ANY SERVICE OR
ADJUSTMENTS:
Depress
clutch/brake
pedal fully and set parking
brake.
Place
motion
control
lever in neutral
position.
Place
attachment
clutch
in "DISENGAGED"
position.
Turn ignition
key to "STOP"
and remove
key.
Make sure the blades
and all moving
parts have completely
stopped.
Disconnect
spark plug wire from spark plug and place
wire where
it cannot
come
in contact
with plug.
TO
REMOVE
MOWER
•
Place
attachment
clutch
in "DISEN-
GAGED"
position.
•
Lower
attachment
lift lever to its lowest
position.
•
Remove
mower
belt from electric
clutch
pulley
(M).
•
Disconnect
front
link (E) from
mower
-
remove
retainer
spring
and washer.
•
Goto either side of mower and disconnect
mower
suspension
arm
(A) from
chas-
sis and rear lift link (C) from rear mower
bracket
(D) - remove
retainer
springs.
•
Goto other side of mower and disconnect
the suspension
arm and rear lift link.
_k CAUTION:
After rear lift links are discon-
nected,
the attachment
lift lever will be spring
loaded.
Have a tight grip on lift lever
when
changing
position
of the lever.
•
Slide mower
out from under right side of
tractor.
TO INSTALL
MOWER
Be sure tractor is on level surface and engage
parking brake.
•
Lower
attachment
lift lever to its lowest
position.
,_
CAUTION:
Lift lever
is spring
loaded.
Have a tight grip on lift lever, lower
it slowly
and engage
in lowest
position.
NOTE:
Be sure
mower
side
suspension
arms (A) are pointing
forward
before
sliding
mower
under tractor.
•
Slide mower
under tractor
until it is cen-
tered
under tractor.
•
ATTACH
MOWER
SIDE SUSPENSION
ARMS
(A) TO CHASSIS
- Position
hole
in arm over pin (B) on outside
of tractor
chassis
and secure
with retainer
spring.
•
Repeat
on opposite
side of tractor.
2O
03000tex
Publicidad
