Craftsman 917.28970 Manual Del Operador página 30

TROUBLESHOOTING CHART:
See appropriate section in manual unless directed to Sears service center
PROBLEM CAUSE
CORRECTION
Headlight(s) not
working
(if so equipped)
1 Light switch is "OFF".
2 Bulb(s) or lamp(s) burned out.
3 Faulty light switch.
1 Turn light switch "ON".
2 Replace bulb(s) or lamp(s).
3 Check/replace light switch.
4 Loose or damaged wiring. 4 Check wiring and connections.
5 Blown fuse. 5 Replace fuse.
Battery will not
1 Bad battery cell(s). 1 Replace battery.
charge
2 Poor cable connections. 2 Check/clean all connections.
3 Faulty regulator (if so equipped). 3 Replace regulator.
4 Faulty alternator. 4 Replace alternator.
Loss of drive
Freewheel control in "disengaged" 1 Place freewheel control in
position. "engaged" position.
2 Motion drive belt worn, damaged, 2 Replace motion drive belt.
or broken.
3 Air trapped in transmission 3 Purge transmission.
during shipment or servicing.
Engine "backfires"
1 Engine throttle control not sel 1 Move throttlecontrol between
when turning
between half and full speed (fast) half and full speed (fast) position
engine "OFF"
position before stopping engine, before stopping engine.
Engine dies when
1 Reverse operation system (ROS) 1 Turn ignition key to ROS "ON"
tractor is shifted
is not "ON" while mower or other position. See Operation section.
attachment is engaged.
into reverse
NEED MORE HELP?
Youq_l_ f ind the arm_J_r and mo_e on managemyhomeoCOm _ fo_ free!
o Find this and a[[ your other product manuals online.
o Get answers from our team of home experts.
o Get a personalized maintenance plan for your home.
o Find information and too[s to he[p with home projects.
brought to you by Sears
30