DELTACALOR Dryer plus electric Manual De Usuario Y De Instalación página 40

Open the bleeding valve (5) on
the upper part of the radiator,
5
until water starts to come out.
Close the bleeding valve.
Open the shut-off valve (6)
(maximum opening recom-
mended) to ensure that the
system water circulates inside
the radiator.
6
If necessary, once the system has been operating for a few min-
utes, check that there is no more air inside the panel or the radia-
tor (noise will be heard), and then activate the individual bleeding
valves (4-5) to allow residual air to escape.
WARNING!
The use in electric mode requires as prerequisite the
presence in the radiator, which is connected to the heat-
ing system, of the heat transfer fluid and that one of the
valves is open (recommended holder valve closed and
other valve open).
[ 40 - EN ]