To ensure good reception of the signal by the fan, stay within a radius of 3 metres from the unit,
as shown in the figure.
CARE AND MAINTENANCE OF
The device is equipped with a removable dust filter which retains the impurities in the air sucked
from the room. Dust amount can stop the appliance.
Turn off the device before cleaning the filter. To do this, if possible disconnect the power supply to
the device and move the temperature selector to OFF.
To clean or replace filter, follow these steps:
1.
Grasp the filter tab.
2.
Pull the filter sideways and out.
3.
Use a vacuum cleaner to remove the dust on the filter. If the filter is particularly dirty, use a
damp cloth to remove debris. Dry filter completely before replacing it. Clean the filter at
least once a month.
4.
After cleaning or changing the filter reposition it correctly.
WARNING - The device can work without a filter as well. Make sure that the device is
switched off or without any power supply for the entire cleaning phase. Reinstate the electricity supply
and make the device work, only after the filter has been put back in the correct position.
30°
THE ANTI-DUST FILTER
[ 54 - EN ]