Antifrost Mode; Eco Mode - DELTACALOR Dryer plus electric Manual De Usuario Y De Instalación

Antifrost mode

The Antifrost mode enables the heating element of the electronic control when the room tem-
perature drops below a specific threshold (please refer to the thermostat user manual).
It is recommended to use this mode when the room is not occupied for several days.
• Press the MODE key until this mode is selected.
• LED A blue.
Boost 2h mode
The Boost 2h mode can be used to heat quickly the room.
• To enable the function, press the relative
play. The user can exit this mode by pressing the
or MODE.
• The two LEDs are red: resistance and Boost ON
• Maximum fan temperature: 27 °C.
• Maximum resistance temperature: 28 °C.
Fil-pilote
• Press the MODE key and select the
display.
• Set the desired temperature through the
Functions
Key-lock
This function allows the user blocking the keypad so to avoid inadvertent changes. To enable the
Key-lock function, press simultaneously the keys
function, repeat the same procedure.

ECO mode

The ECO function can be used to reduce the electric consumption when the room is not occu-
pied for a certain period.
• To enable the function, press the dedicated
ered by 3°C. The
• To disable this function, press again the
• LED A blue: resistance OFF
• LED A red: resistance ON
ASC function
To enable the ASC function press the
display.
• Press simultaneously the keys
• To disable this function, repeat the procedure.
NOTE - This function is not available on every thermostat model; please refer to the user manual for a
precise description of the function.
NOTE - This function is only available in the Crono mode.
Fil-Pilote mode, the relative icon will show on the
icon is shown on the display.
MODE key until the
and
[ 45 - EN ]
BOOST 2h key, the
BOOST key, the
and keys.
MODE and
key. Every temperature previously set is low-
key.
Crono icon is shown on the
for at least three seconds.
icon is shown on the dis-
ON/STAND-BY key
for 3 seconds. To disable the