2) Insert the cassette tape into the deck.
3) Use the cassette control buttons to control cassette tape playback:
a. RECORD: used to copy audio from other sources to tape
b. PLAY: used to play cassette tapes
c. REVERSE: used to rewind a cassette tape
d. FORWARD: used to move forward on a cassette tape
e. STOP/EJECT: 1
cassette door allowing you to remove the cassette tape
f. PAUSE: used to pause a cassette type while playing
IMPORTANT!
When using the cassette deck:
•
Make sure to insert the cassette in
the correct direction.
•
To avoid damaging the cassette, we
strongly recommend taking it out of
the equipment after playing the
cassette.
•
To prevent accidental erasure of your
cassette tape contents, move the
anti-erase tabs to the locked position.
This will prevent recording on the
cassette tape. To allow recording,
move the anti-erase tabs back to the
unlocked position.
st
push will stop a cassette tape from playing, 2
(Anti-erase tape position)
-11-
nd
push will open the