Publicidad
Idiomas disponibles
Idiomas disponibles
Bluetooth® In Operation
1) While playing audio on the VWRP-4200 device, press BT/IN button
2) Turn on the external device to receive Bluetooth® audio signals
3) Find the name of "VICTOR VWRP-4200" and connect to the device
4) After the Bluetooth® device is connected successfully, the "BT" text on the VWRP-4200 LC
display screen will change from flashing to steady on.
Bluetooth® Out Operation
Transmit the audio signal from the unit via BT/OUT:
1) When the host plays the audio, press BT/OUT
2）Turn on the device to receive Bluetooth® audio signals
3）Then automatically connects to VICTOR VWRP-4200.（Note: some receiving devices need to
click the link to receive the audio signal transmitted by VICTOR VWRP-4200）
4）After the Bluetooth® device is connected successfully, the emission indicator light on the host
panel will change from shining to steady on
Playing Audio from USB/SD Card
The system is able to decode and playback all MP3/WMA files stored in the memory media
connected to the USB port or SD/MMC card slot.
1) Tap the POWER/VOLUME knob to turn the equipment on.
2) Following the illustration below, insert a USB device face up into the USB port, making sure it
is fully inserted. Alternatively, insert a memory card in the direction of the arrow (as shown on
the label next to the memory card slot), making sure to insert it straight without bending.
3) Set the function selector to USB/SD mode. (If you have both a USB device and a memory card
inserted, press the MODE button to toggle between USB and SD mode.) The system will start
reading the storage medium automatically after mode selection and will display the total
number of folders and MP3/WMA files.
4) The system will then start audio playback from the media storage device (USB or SD card)
automatically.
IMPORTANT: Connecting the USB device upside
down or backwards could damage the audio system
or storage media (USB drive, SD or MMC card).
Check to ensure the direction is correct before
connection.
USB/SD Playback controls
• PLAY/PAUSE: Press this button once to stop playing, press it again to continue.
• STOP: Press this button to stop audio playback, the display will then show the total number of
MP3/WMA files.
buttons
-7-
Publicidad
