Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING: Ensuring Adequate Ventilation
Make sure the ceramic hob is well ventilated and that air inlet and outlet are not blocked. In order to avoid
accidental touch with the overheating bottom of the hob, or getting unexpectable electric shock during working, it is
necessary to put a wooden insert, fixed by screws, at a minimum distance of 25mm from the bottom of the hob.
Follow the requirements below.
There are ventilation holes around outside of the hob. YOU MUST ensure these holes are not blocked
by the worktop when you put the hob into position.
• Be aware that the glue that join the plastic or wooden material to the furniture, has to resist to
temperature not below 150
• The rear wall, adjacent and surrounding surfaces must therefore be able to withstand an temperature
of90
C.
O
Before Locating the Fixing Brackets
The unit should be placed on a stable, smooth surface (use the packaging). Do not apply force onto the controls
protruding from the hob.
Fix the hob on the work surface by screw four brackets on the bottom of hob (see picture) after installation.
A
screw
Min. 25mm
Max. 5mm
C, to avoid the unstuck of the paneling.
O
B
bracket
Max. 5mm
C
Screw hole
13
D
base
V.1
Publicidad
