Publicidad
Idiomas disponibles
Idiomas disponibles
3.6 Deleting the end positions
1. With hand-held remote control units pull off the back cover to make the setting.
Caution: Keep battery gently pressed down (contact).
After making the setting, push the cover back on.
2. On the remote control unit press the P2 button once
=> Roller blind confirms with 1 beep + short movement.
3. On the remote control unit press the DOWN button once
=> Roller blind confirms with 1 beeps + short movement.
4. On the remote control unit press the P2 button once
=> Roller blind confirms with 4 beeps + short movement.
3.7 Logging a remote control unit off
i
Only remote control b can be logged off.
1. With hand-held remote control units pull off the back cover to make the setting.
Caution: Keep battery gently pressed down (contact).
After making the setting, push the cover back on.
2. On remote control unit a press the P2 button once
=> Roller blind confirms with 1 beep + short movement.
3. On remote control unit a press the P2 button once
=> Roller blind confirms with 1 beep + short movement.
4. On the remote control unit b press the P2 button once
=> Roller blind confirms with 5 beeps + short movement.
3.8 Resetting to factory settings using a paired hand-held
remote control
Delete all settings and all paired remote control units
1. With hand-held remote control units pull off the back cover to make the setting.
Caution: Keep battery gently pressed down (contact).
After making the setting, push the cover back on.
2. On the remote control unit press the P2 button once
=> Roller blind confirms with 1 beep + short movement.
3. On the remote control unit press the STOP button once
=> Roller blind confirms with 1 beep + short movement.
4. On the remote control unit press the P2 button once
=> Roller blind confirms with 5 beeps + short movement.
Edition 09.2019
Subject to technical changes I
ROLLER BLIND R_03 Radio-controlled 12 V motor
3.9 Resetting to factory settings without a hand-held remote
control
Delete all settings and all paired remote control units
1. Keep the setting button pressed until the roller blind
has confirmed with 4 short movements 4 seconds
P2
apart.
=> Roller blind confirms with 4 short movements
4 seconds apart + 4 beeps after release of the
setting button.
3.10 Limit number of channels
P2
Using these settings, it is possible to limit the remote control unit to the number
i
of channels that are actually needed for controlling the drive systems. Using
channel '0', all blinds are controlled.
1. On the remote control unit simultaneously press the
P1– and P1+ buttons.
=> the LCD display unit indicates 'C'.
a
P2
2. On the remote control unit keep the P1 and
P1+ buttons pressed.
a
=> the LCD display unit indicates '
P2
P2
b
P2
3. On the remote control unit, press the P1 or P1+
P2
button to select the number of channels. If, for
example, you are controlling only two drive units
with this remote control, select '
—
b
a
4. On the remote control unit press the STOP button
once.
=> the LCD display unit indicates ' '.
P2
5. After a short time, limitation to two channels gets
indicated.
i
If you want to disable the additional 'Limit channel numbers' function, repeat
steps 1 to 5 and at step 3 increase the setting to '15'.
P2
Instructions for installation and use
Charging socket
Setting button
(applies only to 15-channel remote control units)
C
P1+
P1–
P1+
P1–
15
'.
15
2
'.
2
P1–
P1+
2
DE
DE
FR
FR
C
15
FL
FL
2
2
EN
EN
ES
ES
17 17
IT
IT
Publicidad
