Workpiece / sector
Coarse sanding (grain) 40
Fine sanding (grain)
Rotation speed
preselection
Workpiece / sector
Coarse sanding (grain) 120
Fine sanding (grain)
Rotation speed
preselection
Workpiece / sector
Coarse sanding (grain) 80
Fine sanding (grain)
Rotation speed
preselection
Stationary work
♦
Turn the power tool over as shown in Figure C
and place it on a stable worktop.
♦
Insert two screw clamps
provided
and use them to clamp the power
tool tight.
Tips and tricks
■
Never work on wood and metal using the same
abrasive belt
.
■
Ripped or torn abrasive belts can damage the
workpiece. For this reason, replace abrasive
belts regularly.
■
Only store abrasive belts in a hanging position
since they are made unusable by creases etc.
│
GB │ IE
■
18
De-rusting steel
120
medium / high (3–4)
Plastics
240
low / medium (2–3)
Nonferrous metals
(e.g. aluminium)
150
medium / high (3–4)
into the opening is
Maintenance and cleaning
WARNING! RISK OF INJURY! Switch
the appliance off and remove the
power plug before starting any work
on the appliance.
The belt sander is maintenance-free.
■
Always clean the appliance directly after
finishing work.
■
For cleaning the housing use a dry cloth, under
no circumstances should you use detergents,
solvents or abrasive cleaners.
Emptying / cleaning the dust box
♦
Pull the dust box
♦
First, open the dust box
Empty the dust box completely by tapping it
and then replace the dust box
ance again.
♦
Ensure ventilation openings are always free.
♦
Remove any adhering swarf with a brush.
Disposal
The packaging is made from environment-
ally friendly material and can be disposed
of at your local recycling plant.
Do not dispose of power tools in
your normal household waste!
European Directive 2012/19/EU requires that worn-
out power tools be collected separately and recycled
in an environmentally compatible manner.
Your local community or municipal authorities can
provide information on how to dispose of the worn-
out appliance.
:
off the appliance.
by removing the lid.
on the appli-
PBS 600 B1