Keba e Serie Manual Del Usuario página 13

Important information
Safety instructions
WARNING!
!
Not observing the safety instructions can result in risk of death, injuries and damage to the
device! KEBA AG assumes no liability for claims resulting from this!

Electrical hazard!
The installation, commissioning and maintenance of the charging station may only be
performed by correctly trained, qualified and authorized electricians
sponsible for the compliance with existing standards and installation regulations. For
details, see "KeContact P20 Installation manual (for the specialist)".

Electrical hazard / fire hazard!
Never use damaged, worn or dirty charging plugs.

The owner must ensure that the charging station is only ever operated in perfect con-
dition:
- The charging station must be checked regularly for faulty sockets and connectors
and damage to the housing (visual inspection).
- A damaged charging station must be switched off immediately and replaced.
- Repair work to the charging station is not permitted and may only be performed by
the manufacturer (replacement of the charging station)!
- Do not carry out any unauthorized conversion work or modifications to the charging
station!
- Do not remove any notices on the device, such as safety symbols, warning notices,
rating plates, nameplates or cable markings!

The charging station does not have its own power switch! The RCD circuit breaker and
the line circuit breaker of the building installation serve as mains disconnector.

No extension cables are permitted for connecting an electric vehicle to the power sup-
ply device for electric vehicles.
Only electrical vehicles or their chargers may be connected. No connection of other
loads is permitted (electric tools etc.)!

Read the information and instructions for your vehicle carefully before you charge the
vehicle using the charging station.
Ventilation:
A number of vehicles require an external ventilation system in the interior areas due to
the possible creation of toxic or explosive gases during the charging procedure.
2
Persons who, due to their special training, expertise and experience as well as knowledge of current standards, are
able to assess the work performed and the possible hazards.
Important information
2
who are fully re-
13 / 52