Tabla de contenido
Publicidad
24
English
7. Fuel and chain oil
■ HOW TO MIX FUEL
IMPORTANT
Agitate carefully.
1. Measure out the quantities of gasoline and oil to be
mixed.
2. Put some of the gasoline into a clean, approved fuel
container.
3. Pour in all of the oil and agitate well.
4. Pour In the rest of gasoline and agitate again for at
least one minute. As some oils may be difficult to
agitate depending on oil ingredients, sufficient
agitation is necessary for the engine to last long. Be
careful that, if the agitation is insufficient, there is an
increased danger of early piston seizing due to
abnormal lean mixture.
5. Put a clear indication on the outside of the container
to avoid mixing up with other containers.
■ FUELING THE UNIT
1. Untwist and remove the fuel cap. Keep the cap and
inlet of the tank clean.
2. Put fuel into the fuel tank to 80% of the full capacity.
3. Fasten the fuel cap securely and wipe up any fuel
spillage around the unit.
WARNING
1. Select bare ground for fueling.
2. Move at least 10feet (3meters) away from the
fueling point before starting the engine.
3. Stop the engine before refueling the unit. At that
time, be sure to sufficiently agitate the mixed
gasoline in the container.
Publicidad
Tabla de contenido
