by the manufacturer or its duly authorized and trained
partners. Thus, constantly high standards of operation
quality and safety are maintained.
Failure to comply with this provision will dispense
the manufacturer from any warranty and liability
claims for the product, including any consequential
damage.
When serviced, the unit is upgraded automatically to the
technical specifications of the product at the moment it is
serviced, and we grant a three-month functional warranty
on the serviced unit.
We recommend having the product serviced at least every
twelve months.
Any provisions in the law pertaining to an electrical safety
inspection have to be complied with.
3.2
Transport, Storage, Shipment
The product ships in a transport box. The product should
be stored in this box, protects the product from humidity
and environmental agents.
When sending the product, it should be placed into the
transport box at all times.
4
Principles of Operation
The HST 300 HP 2.0 allows welding electrofusion fittings
that feature a bar code. Every fitting is provided with a tag
with one or two bar codes on it. The structure of this code
is internationally standardized. The first code, encoding
the data on proper welding, complies with ISO 13950, the
second code, if present, encoding the component trace-
ability data, complies with ISO 12176-4.
The welding control program supports the extended data
encoding specifications under the ISO 12176-4 standard,
e.g., pipe and fitting traceability codes. To use this feature,
the desired data have to be enabled in the configuration
menu, at "Recording" (see Sect. 10.2).
The welding parameters can also be entered manually. The
microprocessor-controlled HST 300 HP 2.0 Welding Unit
• controls and monitors the welding process in a fully
automated fashion,
8
EN
HÜRNER HST 300 HP 2.0 User's Manual
H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
Version May 2016