Deleting Data From Memory; Keeping Data In Memory; Dedicated Welding Unit Information; Displaying Characteristics Of The Welding Unit - HURNER HST 300 HP 2.0 Manual De Instrucciones

to transfer and the "Download completed" message to
appear on the screen.
If a problem occurs while the download is in progress, a
"Not ready" message shows. After the problem condition
is cleared, the download resumes automatically.
If the welding unit recognizes a problem that
cannot be cleared while the data transfer is in
progress, it does not resume the process and dis-
Info
plays a "Download cancelled" error message. To
acknowledge this error, press the START/SET key.
8.5

Deleting Data from Memory

The report data in memory can be deleted only after all
welding reports were transferred, which is indicated by the
"Download completed" message. When the storage media
is unplugged, a "Delete Memory" message appears. If the
START/SET key is pressed at this point, a further confirma-
tion message "Delete Memory, sure?" is shown, which has
to be confirmed by pressing the START/SET key once again.
Then, the report data in memory are deleted.
8.6

Keeping Data in Memory

When the cable or storage media is unplugged, a "Delete
Memory" message is displayed. Press the STOP/RESET key
to keep the current report data in memory. They can then
be printed off once again.
Make a habit of handling the internal storage as
described at the beginning of Sect. 8, to maintain
data integrity and avoid any inadvertent deletion
Important
of the reports in memory.
9

Dedicated Welding Unit Information

9.1

Displaying Characteristics of the Welding Unit

The key technical information on the welding unit itself is
displayed by pressing the ð key at the "Enter Fitting Code"
screen. They are the software version, the serial number
of the unit, the date of the next scheduled maintenance,
and the number of currently available, unused reports. To
quit this screen, press the STOP/RESET key.
If the scheduled service is overdue, a service due message
appears on the screen as soon as the unit is plugged into
18
EN
HÜRNER HST 300 HP 2.0 User's Manual
H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
Version May 2016