Publicidad
Idiomas disponibles
Idiomas disponibles
Get to know your features
Control Panel Features
NOTE
The following control panels are for explanation purpose only. The control panel of the unit you purchased may be slightly
different according to the models. Your machine may not contain some indicators or buttons. The actual shape shall prevail.
1.POWER button
Press to turn the dehumidifier on and off.
2.Timer button
Press to initiate the Auto start and Auto stop feature, in conjuction
with the
and
(or
3.TURBO Pad
Control the fan speed. Press to select either High or Normal fan
speed. Set the fan control to High for maximum moisture removal.
When the humidity has been reduced and quiet operation is
preferred, set the fan control to Normal.
4.CONTINUE button
Press to activate the continuous dehumidifying operation.
5.FILTER button
The check filter feature is a reminder to clean the Air Filter for
more efficient operation. The Filter light(Clean filter light) will
illuminate after 250 hours of operation.To reset after cleaning the
filter, press the Filter button and the light will go off.
10
5/6
7
and
) buttons.
4
3
2
11
6.WIRELESS button
Press the filter button for 3 seconds when the unit is on or off to initiate
the Wireless connection mode. The LED DISPLAY shows 'AP' to indicate
you can set Wireless connection and the compressor is forced off. If
connection (router) is successful within 8 minutes, the unit will exit Wire-
less connection mode automatically and the Wireless indicator illuminates
and the compressor reverts previous state. If connection is failure within 8
minutes, the unit exits the Wireless connection mode automatically.
7.COMFORT button
Press to activate the comfort dehumidifying operation.
Note: On this operation,the unit can not be set humidity level.For some
models, under comfortdehumidifying operation, press Up/Down button
will cancel this feature.
11
Operation Display
9
1
Publicidad
