BGS technic 6005 Manual De Instrucciones página 5

Digital Laser Thermometer | -50 °C to +500 °C
lntroduction
This infrared thermometer is used for measuring the temperature of the object's surface, which is
applicable for various hot, hazardous or hard-to reach objects without contact safely and quickly. This
unit consist of Optics, Temperature Sensor Signal amplifier, Processing circuit and LCD Display. The
Optics collected the infrared energy emitted by object and focus onto the Sensor. Then the sensor
translates the energy into an electricity signal. This signal will be turned out to be digital shown on the
LCD after the signal amplifier and processing circuit.
Warning
To avoid the potential situation may cause harm or damage to
people, please pay attention to the following items:
•
Before you use this unit, check on the plastic housing carefully.
If there is any damage, do not use it.
•
Do not point laser directly at eye or indirectly off reflective
surfaces.
•
Do not use this unit in the environment of explosive gas, steam
or dusty.
Caution
To avoid the damage of the unit or the target, please protect from the following situations:
•
EMF (electro-magnetic fields) from arc welders, induction heaters.
•
Thermal shock (caused by large or abrupt ambient temperature changes-allow 30 minutes for
unit to stabilize before use.
•
Do not leave the unit on or near objects of high temperature
Field of view
Make sure the target is larger than the unit's spot size. The smaller the target the closer measure
distance. When accuracy is critical, make sure the target is at least twice as large as the spot size.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 6005
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed