BGS technic 6005 Manual De Instrucciones página 6

Distance to spot size
When take measurement, pay attention to the Distance to Spot Size. As the Distance (D) from the
target surface increases, the spot size (S) of the area measured by the unit becomes larger. The
Distance to Spot size of the unit is 12:1. This unit is equipped with a laser, which is used for aiming.
Emissivity
Most organic materials and painted or oxidized surfaces have an emissivity of 0.95 (pre-set in the
unit). Inaccurate readings will result from measuring shiny or polished metal surfaces. To
compensate, cover the target surface with masking tape or flat black paint. Measure the tape or
painted surface when the tape or painted reach the same temperature as the material underneath.
LCD display & Buttons
LCD display
A Data hold icon
B Scanning icon
C Laser on icon
D Back light on icon
E Low Battery icon
F Temperature unit
G Temperature reading
Buttons
1 LCD display: When pull the trigger, LCD display reading with
SCAN icon. Release the trigger, display reading with HOLD
icon. Built-in 8 sec auto power off function.
2 Laser on/off button.
3 Celsius / Fahrenheit switch button.
4 Backlight on/off button: When backlight is on, any operations
will activate the backlight.
5 Trigger for turning on the unit.
6 Battery compartment
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed