HOMCOM 821-031V90 Manual De Instrucciones página 10

BUTTONS
● POWER: In standby mode, press the 'Power' button to turn on the machine. The
power indicator will turn green. Press again to turn the appliance off. The power
indicator will turn red.
● MODES: Fan, Eco, Dryer, Auto and Cont. (Dehumidification).
● DOWN: Reduce the humidity or timing.
● UP: Increase the humidity or timing.
● FAN: The fan runs at a high or low speed.
● TIMER: Set the timer and query timer. Press again to cancel the timer.
● CHILD-LOCK: Press TIMER' and 'SPEED' simultaneously to start and stop the child-
lock function.
OPERATIONS
Ensure the unit's power matches the local power grid.
MODES
FAN MODE
Under this mode:
● The compressor will not work.
● The fan works at a low speed by default for ventilation only. The speed is adjustable.
● You can not set the humidity level.
● The ambient humidity level (30-90%RH) will show on the display panel.
ECO MODE
Under this mode:
● The default humidity level is Rh60%.
● If the ambient humidity is equal to or greater than 60%, the unit will function as a
dehumidifier. The fan speed cannot be adjusted.
● If the ambient humidity is less than 60%, the unit will function as a fan. The fan speed
is cannot be adjusted.
● The humidity level cannot be adjusted.
DRY MODE
Under this mode:
● The compressor will work continuously. The fan runs at a high speed, regardless of
room humidity.
● The compressor has a three-minute delay protection function.
● Fan speed and humidity level cannot be adjusted.
● Ambient level (30-90%RH) will show on the display panel.
AUTO MODE
Under this mode:
● If the ambient humidity is equal to or greater than 70%, the appliance will operate as a
strong dehumidifier. The fan speed cannot be adjusted.
● If the ambient humidity is between 50-70%, the unit will operate as a weak
dehumidifier. The fan speed cannot be adjusted.
● If the ambient humidity is less than 50%, the unit will work in fan mode at low speed.
The fan speed cannot be adjusted.
10