Publicidad
Idiomas disponibles
Idiomas disponibles
● The ambient humidity level (30-90%RH) will show on the display panel. The humidity
cannot be adjusted.
DEHUMIDIFICATION MODE
Under this mode:
● The appliance will work to reduce humidity when turned on for the first time or
selected through mode conversion.
● The fan speed is set to high by default.
● You can adjust the humidity level (within the range of 35-85% by pressing the UP and
DOWN buttons).
FUNCTIONS
ANTI-MILDEW FUNCTION
When turning the appliance off, if the machine is not in fan mode, pressing the power
button will cause the machine to continue running for one minute before shutting down.
This is not a malfunction.
TIMER FUNCTION
To use this function, press the 'TIMER' button. This function will automatically turn the
appliance off while running. It can also automatically turn the appliance on while on
standby.
Set a timer between 1-24 hours by pressing the 'UP' or 'DOWN' buttons, which
increases/decreases the time by one hour.
CHILD-LOCK FUNCTION
Press the 'TIMER' and 'SPEED' buttons simultaneously to activate the child lock. The
indicator will light and no buttons will work. To turn off the function, press 'TIMER' and
'SPEED' again.
WATER FULL ALARM
When the water tank is full:
● The sign will flash and the buzzer will make a sound.
● The tank should be drained and put back into place, so the appliance can operate
normally.
NOTE: If you set the humidity above the ambient humidity, the dehumidifier will not
work.
DRAINAGE
To manually drain the tank:
● Place your finger in the depression of the tank and gently remove it to avoid leakage.
● Pour out the water, then put the tank back and restart the appliance.
11
Publicidad
