Descargar Imprimir esta página

MTD 450 Serie Manual Del Operador página 13

Ocultar thumbs Ver también para 450 Serie:

Publicidad

Idiomas disponibles

Idiomas disponibles

Maintenance& Adjustments
Maintenance
General Recommendations
Always observe
safety rules when performing
any
maintenance.
The warranty on this chipper shredder does not cover
items that have been subjected to operator abuse or
negligence. To receive full value from warranty, operator
must maintain the equipment as instructed here.
Changing of engine-governed speed will void engine
warranty.
All adjustments should be checked at least once each
season,
Periodically
check all fasteners and make sure these are
tight.
Lubrication
1.
WARNING:
Always stop engine, disconnect
spark
plug, and ground
against engine
before, cleaning,
lubricating,
or performing
any type of maintenance
on your machine.
Lubricate
the release rod and spring with
light oil once a
season. See Fig. 6-1.
Model
Series 460 Shown
Figure 6-1
2.
Lubricate
the pivot points on the hopper with light oil once
a season.
3.
Lubricate
the pivot points on the chute deflector
with light
oil once a season.
4.
Follow the separate engine manual
packed with your unit
for engine
lubrication
instructions.
Equipment Care
Clean the chipper
shredder
thoroughly
after each use.
Wash bag periodically
with water. Allow to dry thoroughly
in shade.
If the discharge
area becomes
clogged,
remove flail screen
and clean as instructed
below.
NOTE:Cleaning
with a forceful
spray of water is not
recommended
as it could contaminate
the fuel system.
Engine Care
Refer to the Maintenance
section of the Engine Owner/Operator
manual packed
with your unit. Read and follow
instructions
carefully.
Check engine oil level before each use as instructed
in the
separate engine
manual.
Clean or replace air cleaner every 25 hours under normal
conditions.
Clean every few hours under extremely
dusty
conditions.
To service the air cleaner, refer to the engine
manual.
The spark plug should
be cleaned and the gap reset once
a season. Check engine
manual for correct
plug type and
gap specifications.
Clean engine
regularly
with a cloth or brush. Keep the
top of the engine clean to permit
proper air circulation.
Remove all grass, dirt, and combustible
debris from muffler
a rea.
13

Publicidad

loading

Este manual también es adecuado para:

460 serie