Publicidad
Idiomas disponibles
Idiomas disponibles
BACK LIGHT
You can set the desired
brightness
mode.
(Refer to "Back Light Setting"on
page 24.)
COLOR TEMR
You can adjust color temperature.
(Refer to "Color Temperature"
on page 24.)
DTVCC
In addition
to the basic closed caption
described
on page 21, DTV has its own closed caption
called
DTVCC.
(Refer to "DTV Closed Caption"
on page 22.)
PC SETTING
You can adjust the position,
stability
and clarity of the
PC screen.
This menu will appear only in PC mode, and can only
be set when the unit detects
the PC input signal.
(Refer to"PC Settings" on page 28.)
[]Auto
Channel
Scan
If you switchwires(e.g.,betweenantennaandCAW)or if you movethe
unit toa differentareaafter the initialsetting,or if you restore the DTV
channel y ou deleted,you will needto perform auto channel s can.
Before youbegin:
Make sureif the unitisconnectedto antenna orcables,
1
Press [SETUP] to display the main menu.
or
2
Use [Cursor •
/ V] to select"CHANNEL
SETUP",
then press [ENTER].
e.g.) digital TV mode
- WSETUP
-
CHANNEL SETUP
V-CHIP SETUP
LANGUAGE
[ENGLISH]
CAPTION
[OFF]
BACK LIGHT
[£RIGH_
COLOR TEMR
[NORMAL]
DTVCC
3
Use [Cursor •
/ V] to select your desired preset type,
then press [ENTER].
e.g.) digital TV mode
- CHANNELSETUP-
or
ACD_gELETE(DTV)
AUTO PRESETOH(DTV)
AUTO PRESETOH(WOT_
AUTO PRESETCH(CATV)
! CAW takes apl)r0x _Omin
• When aerial antenna
is connected,
select "AUTO PRESET CH(TV)', "AUTO PRESET CH(DTV)"
or"AUTO PRESET CH(TV/DTV)".
• When connected
to CATV, select
"AUTO PRESET CH (CATV)'t
• Scanning
and memorizing
of channels start
automatically,
e.g.) digital TV mode
D25
• When the scanning
and memorizing
are completed,
the lowest memorized
channel
will be displayed.
• When you selected "AUTO PRESET CH(TV/DTV)", the
lowest memorized
analog channel
will be displayed
when the scanning
and memorizing
are completed.
If there is no analog channel,
the lowest memorized
digital
channel
will be displayed.
Note:
• After setting "Auto Channel Scarf', using [CH. • iV] on the
remote control skips unavailable programs automatically.
• If you connect the cable system directly, contact the CATV
installer.
• Ifyou press [POWER] or [SETUP] during auto channel scar
the setting will be canceled.
• When no channel can be received by auto channel scan,
"NO TV SIGNALS"will be displayed on the TV screen.
• Channel settings will be saved even if the power fails.
• Ifyou have Spanish or French menus and need English,
press [SETUP]. Use[Cursor • iV] to select "IDIOMA" or
"LANGAGE'_ P ress[ENTER] repeatedly to select "ENGLISH".
Press[SETUP] to exit the main menu.
• With regard only to the digital channel, even after the
scanning is completed if you unplug the AC power cord
before turning off the unit by pressing [POWER], the
channel setting may be lost.
[] Language
Selection
Youcan chooseEnglish,Spanishor Frenchasyour0n-screenlanguage.
1
Press [SETUP] to display the main menu.
Use [Cursor•
Iv]
to select"LANGUAGE",
then press [ENTER] repeatedly
to change the setting,
e.g.) digital TV mode
- W SETUP -
CHANNEL SETUP
V-CHIP SETUP
LANGUAGE
[ENGL[SR]
GAPTEON
[OFF]
SACK LIGHT
[BREGHT]
COLOR TEM£
[NORMAL]
0 r
CTVCC
Press [SETUP] to exit.
EN
Publicidad
