Publicidad
Idiomas disponibles
Idiomas disponibles
[] FAQ
Check the antenna
or cable connection
to the unit.
Check the batteries
of the remote control.
Check if there is an obstacle between
the infrared sensor window
and the
remote control.
Test the signal output
.If OK, then possible infrared sensor trouble.
(Refer to"lR Signal Check"on
page 46.)
Aim the remote control
directly
at the infrared
sensor window
on the
My remote control
does not work. What
should
I do?
front of the unit.
Reduce the distance to the unit.
Re-insert the batteries with their polarities(+/-signs)
as indicated.
When there is an infrared-equipped
device such as PC near this unit, it
may interrupt
the remote control
signal of this unit.
Move the infrared-equipped
device away from this unit, change the
angle of the infrared sensor or turn off the infrared communication
function.
Howcomethe
Initial setuP appears every
• Connectthe
RFcabletothe
unit directly
and run the initial setup.
time I turn on this unit?
• Make sure to complete
the channel
scan before turning
off the unit.
• Make sure auto channel
scan has been completed.
(Refer to"Auto
Channel Scan"on
page 14.)
• Auto channel
scan must be completed
when you set up the unit for the
first time or move it to a location
where previously
unavailable
channels
are broadcast.
• The selected
channel
may not be broadcasting.
• When auto channel
scan is interrupted
and not completed,
Why I cannot watch some of TV programs?
some channels will not be received. Make sure to complete.
(Refer to"Auto
Channel Scan"on
page 14.)
• The selected
channel
cannot be viewed by the V-chip setting.
(Refer to"V-chip"
on page 25.)
• The unit requires some kind of antenna
input. An indoor
antenna
(rabbit
ears), an external
antenna,
or an RF coaxial cable from your wall or cable
/satellite
box needs to be plugged
into the unit.
'. Check if the right input mode is Selected by pressing [INPUT] 0[ Using
How come there is no image from the
[CH, A/V].(Referto
Switching
Each Input Mode
on page 15.)
connected
external devices?
• Check the antenna
or Cable connection
to the unit.
Whenever
I entered channel
number,
• Many digital
channels have alternate
channel
numbers. The unit changes
it changes automatically,
the numbers
automatically
to the ones signifying
the broadcasting
stations. These are the numbers
used for analog broadcasts.
• Clean the disc.
,. Ensure the disc is Correctly inserted.
,_ 4,
Ji
,
,,
,
.Checkifthediscisdefectivebytryinganotherdisc.
Jwy msc canno_ De playea DaCK
...........
.
..
?
• Lance the parenta
OcKor cnange the contro
eve
is there any way i can play my alsc.
• Insert a €orrect disc that plays back on this unit.
• Handle
a disc with special care so that it does not have fingerprints,
scratches or dusts on its surface.
• Captions that are delayed
a few seconds behind the actual dialogue
are
Why are captions
not displayed
entirely?
common
for live broadcasts.
Most captioning
production
companies
can
Or, captions
are delayed
behind the
display a dialogue
to maximum
of 220 words per minute. Ira dialogue
dialogue,
exceeds that rate, selective
editing
is used to insure that the captions
remain up-to date with the current TV screen dialogue.
How can I set the Clock ?
• There is no clock function
on this unit.
i i_!i
EN
Publicidad
