Publicidad
Idiomas disponibles
Idiomas disponibles
iNSTALL
THE UPPER
DECORATIVE
FLUE, cont'd.
NON=DUCTED HOODS ONLY
(8-FOOT AND 9=FOOT CEILINGS)
4. Install the upper flue with air vent "up".
Secure to the support frame with (2)
2.gxg.5mm mounting screws. Fig. 16.
(IO-FOOT CEILINGS)
5. Discard the upper flue supplied with the
hood.
Replace
with
the upper
flue
supplied
with
flue extension
model
FXN54SS.
6. Install with air vents "up" and secure to the
support
frame
with
(2) 2.gxg.5mm
mounting screws.
iNSTALL
LOWER
DECORATIVE
FLUE
1. Slide the lower flue up and over the upper
flue until it contacts the ceiling.
Temporarily
secure
the both
halves
together with duct tape. Fig. 17.
iNSTALL
THE HOOD
_
CAUTION: At least two installers
are
required due to the weight and size of the
hood.
1. Secure the hood to the support frame with
(6) 3.9x9.5mm mounting screws and (2)
serrated washers. Fig. 18.
MOUNTING SCREWS
(2._
\
LOWER
FLUE
TAPE
SERRATED
WASHERS
-12-
(3.gxg,Smm)
Publicidad
