Publicidad
Idiomas disponibles
Idiomas disponibles
Power:
This button will put the appliance on standby, whilst allowing you to
view the flame effect through the screen. Pressing the same button
again will turn off all functions simultaneously.
Timer:
Press the button repeatedly to cycle through the available options,
which include 30 minutes, one hour, two hours, three hours, four
hours, five hours, six hours and 'off'. The display will show the
corresponding time setting, such as '30' for 30 minutes or '3H' for
three hours. Once the timer is set, the fireplace will automatically
turn off when the timer reaches zero minutes. The current timer can
be seen on the display. 'NONE' indicates that the timer is currently
off.
Flame:
This button controls the flame effect, so you can adjust the flame to
your desired level of intensity. Press the button to increase or
decrease the flame effect. Continue to press it to cycle through the
available settings.
The brightness levels of the flame are high, medium, low and off.
The display will indicate the current setting as L3, L2, L1 or off,
respectively.
Heater:
The default temperature is 72 °(22°C).
Hold the heater button for five seconds. The display will flash –
press the button again to change the temperature. The setting
range is between 62-82°F (21-27°C). To change between °F and
°C, hold the power button for five seconds when the heater is on.
Once set, the display will flash five times.
Weekly timer:
Use the timer button to turn on the weekly timer.
Plus:
Increase the time and temperature during the weekly timer setting.
Minus:
Decrease the time and temperature during the weekly timer
setting.
18
Publicidad
