Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY
INSTRUCTIONS
For your own safety, never connect plug to power source
outlet until all assembly and adjustment steps are
completed, and you have read and understood the safety
and operating instructions.
Slotted screwdriver
Combination wrench
L I ] T_I I I I I I I I
Framing square
8" & 10" Adjustable wrenches
Combination square
Socket wrench
with 23 mm. socket
TABLE TO COLUMN ASSEMBLY (FIG. B THROUGH F)
1.
Locate the worm gear, table crank, and table support
lock handle from the loose parts bag.
2.
Insert the worm gear (1) into the table crank handle
hole (2) from inside the table support (3). Make sure
the worm gear (1) meshes with the inside gear.
3.
Insert the table support lock handle (4) into the hole
at the rear of the table support. Tighten.
NOTE: Table removed from support in illustration for
clarity.
Fig. B
_
1
4.
Place the rack (5) in position inside the table support(3),
making sure the worm gear (1) on the inside of the
table support is engaged with the teeth of the rack.
The Drill Press is very heavy and MUST be lifted with the
help of 2 PEOPLE OR MORE, to safely assemble it.
COLUMN SUPPORTTO
BASE (FIG. A)
1.
Position base (1) on floor.
2.
Place column (2) on base, aligning holes in column
support with holes in base.
3.
Locate four long hex bolts (3) from loose parts bag.
4.
Place a bolt in each hole through the column
support and the base. Tighten with an edjust_ble
wrench.
Fig. A
Fig. C
3 !
2
Publicidad
