Craftsman 137.219120 Manual De Operación página 9

BASE- Supports the drill press. For additional stability,
holes are provided in the base to bolt the drill press to
the floor. (See "Specific Safety Instructions for Drill Presses".)
BACKUP MATERIAL - A piece of scrap wood placed
between the workpiece and table. The backup board
prevents wood in the workpiece from splintering when the
drill passes through the backside of the workpiece. It also
prevents drilling into the table top.
BELT GUARD ASSEMBLY - Covers the pulleys and belt
during operation of the ddll press.
BELT TENSION - Refer to the "Assembly" Section,
"Installing and Tensioning Belt."
BELT TENSION KNOB - Tightening the knob locks
the motor bracket support maintaining correct belt distance
and tension.
BEVEL SCALE - Shows the degree of table tilt for bevel
operations. The scale is mounted on the side of the arm.
CHUCK - Holds the drill bit or other recommended
accessory to perform desired operations.
CHUCK KEY -A self-ejecting chuck key which will pop
out of the chuck when you let go of it. This action is
designed to help prevent throwing of the chuck key from
the chuck when the power is turned "ON". Do not use
any other key as a substitute;order a new one if damaged
or lost.
COLUMN - Connects the head, table, and base on a
one-piece tube for easy alignment and movement.
COLUMN COLLAR - Holds the rack to the column.
Rack remains movable in the collar to permit table
support movements.
COLUMN SUPPORT - Supports the column, guides the
rack and provides mounting holes for column to base.
DEPTH SCALE - Indicates depth of hole being drillecl
DEPTH SCALE POINTER - Indicates the drilling depth
by pointing to the depth scale.
DEPTH SCALE STOP NUTS - Locks the depth scale to
selected depth.
DRILL ON/OFF SWITCH - Has locking feature. This
feature is intended to help prevent unauthorized and
possible hazardous use by children and others. Insert the
key into the switch to turn the drill press on.
DRILLING SPEED - Changed by placing the belt in any
of the steps (grooves) in the pulleys. See the Spindle
Speed Chart inside the belt guard.
FEED HANDLE - Moves the chuck up or down. If
necessary, one or two of the handles may be removed
whenever the workpiece is of such unusual shape that it
interferes with the handles.
FENCE - Attaches to the table to align the workpiece or
for fast repetitive drilling.Removable. Remove fence when
it interferes with other drill press accessories.
HEAD LOCKS -Locks the head to the column. ALWAYS
lock the head in place while operating the drill press.
RACK - Combines with gear mechanism to provide easy
elevation of the table by the hand operated table crank.
REVOLUTION PER MINUTE (R.P.M.) - The number of
turns completed by a spinning object in one minute.
SPINDLE SPEED -The R.P.M. of the spindle.
SPRING CAP - Adjusts quill spring tension.
TABLE - Provides working surface to support workpiece.
TABLE BEVEL LOCK - Locks the table in any position
from 0 °- 45 °.
TABLE CRANK HANDLE - Elevates and lowers table.
Turn clockwise to elevate table. Support lock must be
released before operating crank.
TABLE SUPPORT LOCK -Tightening locks the table
support to the column. Always have it locked in place
while operating the drill press.
TABLE SUPPORT - Rides on the column to support the
table.
WORKPIECE - Material being drilled.
DRILL BIT - The cutting tool used in the drill press to
make holes in a workpiece.