MAINTENANCE &
STORAGE
WARNING:
Always be sure that all the battery
cartridges are removed from the machine before
storing or carrying the machine or attempting to
perform inspection or maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
Carrying the machine
CAUTION:
Before carrying the machine with
both hands, make sure that the handle is folded
completely.
When carrying the machine, hold the machine firmly
with both hands by holding the handle with one hand
and the bottom grip with the other hand.
► Fig.35: 1. Handle 2. Bottom grip
You can also carry the machine using the wheels of
machine. Be sure to extend the handle by pressing the
lock-off button before carrying the machine.
► Fig.36: 1. Lock-off button 2. Handle
► Fig.37
CAUTION:
Do not apply excessive force by
leaning on the extended handle. If the handle
comes off, you may fall over and be injured.
NOTICE:
Make sure that the handle is fully
extended and the lock-off button is returned to its
original position before carrying the machine.
► Fig.38: 1. Lock-off button
Cleaning the nozzle
NOTICE:
Do not remove dirt or debris forcibly.
This may result in personal injury or damage to the
ejection hole causing deviated jet angles or poor
performance.
Use the cleaner pin to remove dirt from or unclog the
nozzle.
► Fig.39: 1. Cleaner pin
NOTE: To maintain the optimal performance, clean
the nozzle periodically.
Cleaning the filter
Detach the water hose connector and remove dirt and
debris from the inside of the filter.
► Fig.40: 1. Water hose connector 2. Filter 3. Sealing
ring
When using the strainer assembly, take the filter out of
the filter case and remove dirt and debris.
► Fig.41: 1. Filter 2. Filter case
NOTE: To maintain the optimal performance, clean
the filter periodically.
Storage
NOTICE:
Always store in an indoor location
where the temperature does not go below freez-
ing. If the high pressure washer freezes and malfunc-
tions, contact your local service center for repairs.
NOTICE:
Be sure to drain the water inside the
machine completely before storing the machine.
Malfunctions or damage caused by freezing due
to inadequate draining are subject to be not cov-
ered by warranty.
Store the accessories in the pocket at the rear of the
machine.
► Fig.42
20 ENGLISH