Maintenance; Transports Y Almacenamiento; Recycling And Disposing - Greencut Cargador CBT560L Manual De Instrucciones

MAINTENANCE

ATTENTION: Unplug the charger power cord from the power supply before
cleaning to prevent serious personal injury.
• Clean the charger surface (except labels) using a damp cloth with a mild detergent.
• Do not use any strong detergents on the plastic housing. They can be damaged by certain
aromatic oil such as pine and lemon, and by solvents such as kerosene.
• Moisture can cause a shock hazard. Wipe off any moisture with a soft dry cloth.
• Use a small brush or the air discharge of a small vacuum cleaner brush to clean the air vents
on the charger.
• Keep the air vents free of obstructions.

TRANSPORTS Y ALMACENAMIENTO

• It is not recommended to leave it in a vehicle during hot or cold conditions.
• Store your charger in a cool dry place between 10 and 25°C.
• Ensure no metal filings or swarf can fall into the vents during storage, as this may cause
serious injury when it is next used.

RECYCLING AND DISPOSING

When you decide to get rid of the machine, make sure to follow the local regulation.
Please help us to protect the environment and to preserve natural resources.
Get rid of the machine taking care of the environment. Do not simply throw it away in the
domestic bin. Please separate plastic and steel to recycle. Take this device to an authorised
recycling centre (Green point).
Package materials are recyclables. Please, throw them away on the appropriate rubbish bin.
ATTENTION: Take the battery to a local recycling and/or disposal center that is
certified for disposal. If the battery breaks or cracks, whether or not it is leaking, do
not recharge it and do not use it. Get rid of it and replace it with a new one - DO
NOT ATTEMPT TO REPAIR IT!
33
EN