Publicidad
Idiomas disponibles
Idiomas disponibles
COMPONENTS
BEFORE FIRST USE
1. Extract the various components from the packaging, check that they are intact and complete,
gently remove any protections and labels. The packaging includes:
•
No.1 Motor body
•
No.1 Glass
•
No.1 4-Blade assembly
•
No.1 USB-C cord
•
No.1 Charging adapter
•
No.1 User Manual
2.
Before the first use, or after long periods of non-use, wash all the parts that come into contact
with foodstuffs as indicated in the "Cleaning and Maintenance" section.
3. Check that all the parts are properly assembled and in position before use.
4. Charge the appliance.
RECHARGING THE BATTERY
1. Open the rubber protection on the motor housing. Connect the USB connector of the cable to
the motor housing.
2. Connect the USB connector to the charging adapter.
3. Connect the charging adapter to the wall socket.
4. The lights will flash during charging. The lights stop flashing when the appliance is fully charged.
See the "Indicator lights" section for details.
5. Approximately 3 hours are needed to fully charge the appliance. Do not charge the appliance for
more than 12 hours to prevent possible damage to the charging adapter due to mains voltage
fluctuations or power outages.
Notes:
•
The appliance is shipped with the batteries approximately 30% charged. During use, one or
two charge LED indicators may turn on. The appliance will work properly even without being
charged before the first use. It is recommended to fully charge the appliance before first use
for best performance.
1. Blender glass 450 ml
2. Blade assembly
7
3. Motor body
4. ON button
5. Battery charge indicators
6. Charging port and charging port cover
7. USB-C charging cord
8. Charging adapter
8
18
Publicidad
