Publicidad
Idiomas disponibles
Idiomas disponibles
•
To ensure continued performance and maximum battery duration, it is recommended to
charge the battery at a room temperature between 15°C and 25°C. Taking this precaution
will help avoid serious damage to the battery itself.
OPERATING PRINCIPLE
IMPORTANT NOTE:
Do not operate the appliance with the glass empty.
1. Put the ingredients in the blender glass.
2. Place the blade assembly on the glass, rotating it clockwise until it locks.
3. Assemble the glass with the motor body, rotating it clockwise to lock it in position (until you
hear a "click").
4. The charge lights will turn on for a few seconds indicating that the appliance has been properly
assembled.
5. Press the ON button to start processing.
6. At the end of processing, release the button and the appliance will stop. Remove the glass
from the base by rotating it counter-clockwise.
7. Turn the glass upside down with the blade assembly at the top, rotate the blade assembly
counter-clockwise to remove it.
Notes and tips:
•
Start processing with pulse movements, rapidly pressing and releasing the speed
button until obtaining the desired consistency.
•
Do not use the blender for more than 1 minute continuously. After 1 minutes of
continuous use, the appliance may overheat. Wait 5 minutes before using the
appliance again. After 3 cycles, the appliance must be stopped for 15 minutes to
allow the main motor to cool down.
•
Do not use to mix very hard dry foods such as meat with bones, soybeans, pepper,
coffee beans, ice cubes and frozen foods without a liquid part. Always add liquid
when mixing fruit or vegetables.
•
The blender can perform up to up to 12 smoothies of 2 bananas, 100ml milk
and 3 ice cubes each in a single charge cycle.
INDICATOR LIGHTS
The indicator lights of the immersion blender provide information about different situations.
•
Battery duration during use:
When the appliance is used and the battery starts to discharge, the LED lights turn off in a
sequence from top to bottom to indicate the residual battery charge.
-
From 100% to 66% charge: lights 1, 2 and 3 will all be lit
-
From 65% to 33% charge: lights 1 and 2 will be lit
-
From 32% to 20% charge: light 1 will be lit
-
If the battery has less than 20% charge, light 1 will flash and the appliance needs to be
charged.
•
Charge indication:
The indicator lights also provide feedback during the charge process:
-
If the battery charge is less than 33%, lights 1, 2 and 3 flash during charging.
-
If the battery charge is between 65% and 33%, light 1 will be steadily lit, and lights 2 and
3 will flash.
19
Publicidad
