Publicidad
Idiomas disponibles
Idiomas disponibles
-
If the battery charge is between 99% and 66%, lights 1 and 2 will be steadily lit and only
light 3 will flash.
-
If the battery charge is greater than 99%, lights 1, 2 and 3 will be steadily lit and the
charge process is considered complete.
•
Overcharge indication:
-
The blender has an automatic protection system that prevents operation under excessive
strain.
-
If the strain is excessive, the appliance automatically turns off. If the appliance is detected
as being under strain, all 3 lights will flash 5 times and the unit will turn off. Releasing the
activation button will cause the lights to turn off. Reduce the blender's workload and wait
15 minutes before using it again.
CLEANING AND MAINTENANCE
Before cleaning, always disconnect the blender from the power socket and leave it to completely
cool.
CLEANING
1. MOTOR BODY
Clean the motor body with a soft cloth or slightly dampened sponge and dry with a cloth.
HAZARD! DO NOT WASH IN THE DISHWASHER OR
IMMERSE IN LIQUIDS!
2. GLASS
Dishwasher-safe at a maximum temperature of 55°C, or washable with hot water and dishwashing
detergent. Hand washing is recommended so as not to alter the characteristics of the
materials.
3. BLADE ASSEMBLY
Washable with hot water and dishwashing detergent.
CAUTION!
Exercise caution when handling the chopping blades.
IMPORTANT NOTE
wool or abrasive detergents for cleaning.
DO NOT WASH IN THE DISHWASHER!
: Do not use chemical detergents, steel
20
Publicidad
