Descargar Imprimir esta página

Husky DPFN64 Manual De Instrucciones página 2

Publicidad

Idiomas disponibles

Idiomas disponibles

<YHUSKY
GENERAL SAFETY RULES
P3
UNPACKING
P6
FEATURES
P7
OPERATION
ADJUSTING THE EXHAUST
P7
LOADING FASTENERS
P7
UNLOADING FASTENERS
P8
CLEARING JAMS
P9
NON-MARRING PAD
PQ
SETTING THE AIR PRESSURE
P10
DEPTH ADJUSTMENT
P10
FIRING THE TOOL
P10
MAINTENANCE
P12
RECOMMENDED HOOKUP
P13
TROUBLE SHOOTING
P14
WARRANTIES
P15
A WARNING:
The warnings and precautions discussed in the manual cannot cover all possible conditions and
situations that may occur. It must be understood by the user that common sense and caution are
factors which cannot be built into this product, but must be supplied by the user.
<YHUSKY
6 In this manual, on the labels, packages and all other information provided with this tool. The following
signal words and meanings are intended to explain the levels of risk associated with this tool.
SYMBOLS
SIGNAL
MEANING
A
WARNING:
Indicates a potentially hazardous situation, which, if not avoided,
could result in death or serious injury.
A
CAUTION:
Indicates a potentially hazardous situation, which, if not avoided,
may result in minor or moderate injury.
CAUTION:
(Without symbol) Indicates a situation that may result in
property damage.
GENERAL SAFETY RULES
INSTRUCTIONS PERTAINING TO A RISK OF
FIRE, ELECTRIC
SHOCK, OR INJURY TO
PERSONS
A WARNING:
When
using
tools,
basic
precautions
should always be followed, including the
following:
CALIFORNIA PROPOSITION 65
SAVE THIS MANUAL
O Keep
this manual
for the safety wamings,
precautions,
operations,
inspections
and
maintenance.
Keep
this
manual
and
the
manual
thoroughly
and
understand
it
receipt in a safe and dry place for future
completely. Save this manual
and review
reference.
frequently for continuing safe operation and
A WARNING:
To
avoid
serious
personal
injury, do
not
attempt to use this product until you read the
A WARNING:
This
product
or
its power
cord
may
contain
chemicals
known
to the State
of California to cause
cancer
and birth
defects
or
other
reproductive
harm.
Wash hands after handling.
instructing others who may use this tool.
SYMBOLS
O Some of the following symbols may be used on this tool. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer.
i> Read operator's manual : To reduce the risk of injury, user must read and understand operator's manual
[IE
before using this product.
Or Risk to hearing: Always wear ear protection when using this tool. Failure to do so may result in hearing loss.
e
Eye protection: Always wear safety goggles, safety glasses with side shields, or a full face shield when
operating this product.
pr Risk of serious personal injury: Never place hands or any other body parts in the fastener discharge area
of the nailer. The tool might eject a fastener and could result in death or serious personal injury.
02
WORK AREA
O Keep the work area clean and well lighted.
Cluttered benches and dark areas increase the
risks of accidents.
@Do
not
operate
the
tool
in
explosive
atmospheres,
such
as
in the
presence
of
flammable
liquids, gases, or dust. The tool
creates
a spark which
may
ignite flammable
liquids, gases or dust.
@ Keep bystanders, children, and others away
while
operating
the tool.
Distractions
could
result in improper use and cause injury.
@ Avoid
unintentional
misfires.
Always
use
caution to avoid accidentally firing. Do not point
towards yourself or anyone whether it contains
fasteners or not.
PERSONAL SAFETY
@ Do not nail on top of another nail. This is able
to cause
the
nail to be
deflected
and
hit
someone, or cause the tool to react and result in
a risk of injury to persons.
@ Remove
finger from the trigger when
not
driving fasteners.
Never
carry the tool with
finger on trigger, the tool is able to fire a fastener.
@ Always wear
eye protection.
Operator and
others in the work area should
always wear
ANSI-approved safety goggles with side shields.
Eye protection is used to guard against flying
fasteners and debris, which may cause severe
eye injury. You can use the goggles packed with
the tool.
@ Always wear hearing protection when using
the tool. Prolonged exposure to high intensity
noise may cause hearing loss.
O Use safety equipment. A dust mask, non-skid
safety shoes and a hard hat must be used for the
applicable conditions. Wear a full face shield if
you are producing metal filings or wood chips.
O Dress properly. Do not wear loose clothing
or jewelry. Contain long hair. Keep your hair,
clothing, and gloves away from moving parts.
Loose
clothes,
jewelry,
or long hair can
be
caught in moving parts.
O Stay alert, watch what you are doing and
use common sense when operating a power
tool. Do not use tool while tired or under the
influence
of drugs, alcohol,
or medication.
A
moment of inattention while operating the tool
may cause serious injury.
0 Avoid unintentional firing. Keep fingers away
from
trigger
when
not
driving
fasteners,
especially when connecting the tool to the air
supply.
@ Keep proper footing and balance at all times.

Publicidad

loading