Kenmore 911.47792 Guía Para El Uso Y Cuidado página 30

CARE ANDCLEANING
RemovableParts
(_ CAUTION:
YOUmust
disconnectelectdcal
power to the oven at the
main circuit breakeror
rusebox beforeattemptingto
replaceoven light bulbs. Do not
touch the light bulbswith bare
hands.The bulbsget very hotvery
quickly. Wrap foam rubberfrom bulb
packagearound bulb when
installing.When removingthe bulb,
wait until the bulb has cooledand
use a dry cloth.
To give you the best lightingavailable,
your oven has twohalogen bulbs. Both
lightsare on the ceiling of the ovencavity.
Receptacle Socket
Bu,
TO REMOVE Cover
1. Youmust disconnecterectricalpower
to the ovenat the maincircuit breaker
or fuse box.
2. Turnthe glass cover
counterclockwiseV4 turn until the tabs
of the glass cover clearthe grooves of
the socket.
3. Pullstraight out to removethe bulb
TO REPLACE
1, Wrap bulb with cotton cloth or bulb
packaging material Don'ttouch bulb
withyour fingers
2, Pushbulb straightinto receptacle all
the way. Use only a 120wolt, 35-watt
halogen bulb.
3. Place the tabs of the glass cover into
the groovesof the socket
4. Turnthe glass cover clockwise
'/4turn.
5. Reconnectelectrical power to the
ovenat the maincircuit breaker or
fuse box.
l;l=i_llJrl:Y:ll|cJrJ=Avl:Fi|l_i_-!
CLEANING MATERIALS
• Dishwashing detergent
• Warmwater
• Scouring pad or soap-filled pad
Bump
In Rack
e.ok- j- Ill
of the Rack_
TO REMOVE
1. Pullthe r_cks out to the stop lock
position
2. Pull up the front of the rack and slide
under the bump off the i_ack guide.
TO CLEAN
Clean with warm water and detergent,
For hard to remove stains, gently scrub
with a scouring pad or a soap-filled pad.
Rinsewell.
Grayporcelain-coated oven racks may
also be cleaned inthe oven duringthe
self-cleancycte. [t is necessaryto wipe
the edges of gray porcelain-coatedoven
racks with a light coating of vegetab4eoil
after cleaning. This will help maintainthe
easeof sliding the racks in and out
of the oven.
TO REPLACE
1. Placethe raised back of the rack onto
the rack guides.
2. Liftthe front of the rack untilthe raised
back slides underthe bump of the
rack guides.
3. Slide the rack all the way back
30
20P311-2 ENv01 2J14103, 1:18 PM