Publicidad
Idiomas disponibles
Idiomas disponibles
Reaction plate
Technical Data
Product Data
Ordering Nr
4220 0012 83
Declarations
Reaction bar
Reaction bars are not machines and do not bear CE marking
nor have a Declaration of Conformity. When a reaction bar is
fitted to an assembly power tool, the complete power tool, in-
cluding the reaction bar and any other accessories, will com-
ply with the Machinery Directive. Therefore it is the power
tool which bears the CE mark and has a Declaration of Con-
formity.
Regional Requirements
WARNING
This product can expose you to chemicals including lead,
which is known to the State of California to cause cancer
and birth defects or other reproductive harm. For more
information go to
www.P65Warnings.ca.gov
Safety
WARNING Risk of Property Damage or Severe In-
jury
Ensure that you read, understand and follow all instruc-
tions before operating the tool. Failure to follow all the
instructions may result in electric shock, fire, property
damage and/or severe bodily injury.
Read all Safety Information delivered together with
►
the different parts of the system.
Read all Product Instructions for installation, opera-
►
tion and maintenance of the different parts of the
system.
Read all locally legislated safety regulations regard-
►
ing the system and parts thereof.
Save all Safety Information and instructions for fu-
►
ture reference.
Statement of use - reaction bar
This product is designed to absorb the reaction torque of as-
sembly power tools.
No other use is permitted. For professional use only.
Product Specific Instructions
Operation instructions
• Make sure that the reaction bar is not cracked or damaged
in any way.
• Attach the reaction bar in the opposite direction of the
drive before running the tool.
Maximum Torque
50 Nm
© Atlas Copco Industrial Technique AB - 9834 5706 00
• Never exceed the maximum torque marked on the reac-
tion bar.
General instructions
Operators of tools with a torque reaction bar should take par-
ticular care to avoid injuries due to crushing. For safety rea-
sons – never allow anyone to operate the tool unless trained
and thoroughly familiar with how the tool works in different
circumstances. The tool may only be used together with the
associated torque reaction bar, which is adapted to the screw
joint application concerned.
WARNING Crushing Hazard
Check the rotational direction of the tool before start! A
start in an unexpected rotational direction can cause bod-
ily injury or property damage.
Make sure that the rotational direction of the tool is
►
correct before starting the tool.
Keep your hands away from the reaction bar while
►
using the tool.
Maintenance instructions
Daily maintenance: Visual inspection of the reaction bar is
recommended. Immediately replace cracked or damaged reac-
tion bars.
Any modification such as, cutting, welding or bending will
reduce both the lifetime and the maximum allowable torque
of the reaction bar.
Useful Information
Website
Information concerning our Products, Accessories, Spare
Parts and Published Matters can be found on the Atlas Copco
website.
Please visit: www.atlascopco.com.
Safety Information
3
Publicidad
