Glacier bay HDQFS6A0235CP Guía De Instalación Y Cuidado página 5

Installation (continued)
3
Preparing the pop-up assembly
□
Remove the pop-up stopper (J) and drain flange
(K) from the drain body (N).
□
Screw the lock nut (M) all the way down, and
push the rubber washer (L) down.
1
L
M
N
J
K
2
4
Installing the drain body
□
Apply silicone sealant (not included) under the
drain flange (K) and place the drain flange (K)
over the drain hole in the sink.
□
From underneath the sink, screw the drain body
(N) onto the drain flange (K). Ensure that the
opening (1) for the ball rod on the drain body (N)
faces towards the rear of the sink.
□
Tighten the rubber washer (L) and lock nut (M) on
the drain body (N). Do not overtighten.
1
L
M
N
5
Please contact 1-855-HD-GLACIER for
K
1
HOMEDEPOT.COM/GLACIERBAY
further assistance.