Glacier bay HDQFS6A0235CP Guía De Instalación Y Cuidado página 6

Installation (continued)
5
Installing the stopper and
horizontal rod
□
Before installation, unscrew the protective cap (1)
from the horizontal rod (P).
□
Insert the pop-up stopper (J) into the drain hole
in the sink.
□
Insert the horizontal rod (P) into the drain body
(N) and through the hole of the stopper (J). See
insert 1.
□
For easier removal and cleaning, rotate the
stopper (J) 90 degrees so that the horizontal rod
(P) does not go through the hole in the stopper
(J). See insert 2.
□
Make sure the joint (O) on the horizontal rod (P)
inserts into the drain body (N) completely, as
shown (2). You can press the two sides of the
joint (O) to remove the horizontal rod (P).
P
1
Insert 2
N
J
N
Insert 1
P
O
2
O
6
Installing the lift rod
□
Slide the lift rod (S) down into the lift rod strap (Q)
until it clicks into the lift rod strap (Q).
S
Q
6
S
Q